Isolated Switchmode Voltage Converter GEN II Maxi 24-12 VDC 25Amps
SVCi241225G2
Quick Overview
“With digital over analogue topology the GEN II range allows the installer/operator to control and monitor various functions”
Electrical
Output Voltage (Converter Mode) | 12 - 14V |
---|---|
Output Voltage (Charger Mode) | Two stage battery charging mode with boost voltage of 14.4V and float of 13.6V |
Input Voltage | 20 - 33VDC (will dip to 17V) |
Constant Rating | 25 Amps (rated @ 40°C) |
Intermittent Rating | 25% rating over the continuous rating at a maximum of 50% duty cycle for 10 minutes |
Momentary Rating | Peak at greater than 25% of continuous rating for 5 seconds |
Galvanic Insolation | Yes |
External Alarm Output | An external signal for remote monitoring of both the pre-emptive and shutdown alarms |
Remote Switching Input | Used to isolate the output from the input with a simple, low current, control switch i.e. toggle switch |
Physical
Input/Output Terminals | High current proprietary terminals with combination M5 fasteners |
---|---|
Control/Monitoring Terminal | Customized 2 gang Euro block |
Construction | Manufactured using corrosion resistant materials throughout, including anodised 6063 aluminium, ABS/ PC plastics and stainless steel hardware. No ferrous materials are used and all PCB assemblies feature conformal coating (tropicalisation). |
Operating Temp | -25°C to + 50°C |
Operating Humidity | Ideally less than 90% |
Dimensions (overall) | 230mmL x 110mmW x 55mmH |
Weight (nominal) | 1150 Grams |
Protection
Input Under Voltage | Warning and shutdown |
---|---|
Output Overload | Warning and shutdown |
Over Temperature | Warning and shutdown |
The GEN II range of SVC and SVCi Maxi Series Voltage Converters as they are known, are designed on the solid foundation of the original product with a host of new features and benefits. With digital over analogue topology the GEN II range allows the installer/operator to control and monitor various functions and provides valuable feedback on the status of the connected load. The GEN II is more compact due to multi-speed fan cooling and as a result no longer relies on convection for cooling.
Available in both common negative and galvanically isolated versions, the GEN II Maxi Series models are designed for high performance installations where a 12VDC source is required in a 24VDC application. The common negative SVC version provides maximum efficiency at a cost effective price and provides all the same protection of the SVCi version with the exception of galvanic isolation. The isolated version ensures complete DC – DC electrical isolation, that is, no common connection between the input and output whatsoever. Isolated converters will eliminate line interference, increase electrical safety with improved circuit protection and reduce voltage transients. This means peace-of-mind when connecting sensitive and often expensive, high-end electronic equipment to the output.